Importance of the degree of antigen polymerization by detoxification in modulating the immunogenicity of acellular pertussis vaccine

For the acellular pertussis vaccine with a high immunogenicity, the concentration, composition and characteristics of acellular pertussis antigens are the crucial points to be considered. Nevertheless, it has not been proved yet whether or not the polymerization degree, one of the characteristics of formalin-detoxified acellular pertussis antigens, has an influence on vaccine potency. Thus, in the present study, the correlations among detoxification conditions of acellular pertussis bulks, their polymerization degrees and their immunogenicities were examined. In addition, the relative importance of pertussis toxoid in vaccine immunogenicity was also investigated. Results show that a lower lysine concentration during detoxification induces highly-polymerized antigens, the immunogenicity has a great dependency on the polymerization degree of antigens, and also pertussis toxoid has a relatively stronger influence on the immunogenicity than other antigens. Accordingly, in the aspect of the potency of detoxified acellular pertussis vaccine, it can be demonstrated that the polymerization of antigens and its degree are the major factors affecting the immunogenicity along with a relatively high content of pertussis toxoid.     

Epoxide Formation on the Aromatic B Ring of Flavanone by Biphenyl Dioxygenase of Pseudomonas pseudoalcaligenes KF707

Prokaryotic dioxygenase is known to catalyze aromatic compounds into their corresponding cis-dihydrodiols without the formation of an epoxide intermediate. Biphenyl dioxygenase from Pseudomonas pseudoalcaligenes KF707 showed novel monooxygenase activity by converting 2(R)- and 2(S)-flavanone to their corresponding epoxides (2-(7-oxabicyclo[4.1.0]hepta-2,4-dien-2-yl)-2, 3-dihydro-4H-chromen-4-one), whereby the epoxide bond was formed between C2′ and C3′ on the B ring of the flavanone. The enzyme also converted 6-hydroxyflavanone and 7-hydroxyflavanone, which do not contain a hydroxyl group on the B-ring, to their corresponding epoxides. In a previous report (S.-Y. Kim, J. Jung, Y. Lim, J.-H. Ahn, S.-I. Kim, and H.-G. Hur, Antonie Leeuwenhoek 84:261-268, 2003), however, we found that the same enzyme showed dioxygenase activity toward flavone, resulting in the production of flavone cis-2′,3′-dihydrodiol. Extensive structural identification of the metabolites of flavanone by using high-pressure liquid chromatography, liquid chromatography/mass spectrometry, and nuclear magnetic resonance confirmed the presence of an epoxide functional group on the metabolites. Epoxide formation as the initial activation step of aromatic compounds by oxygenases has been reported to occur only by eukaryotic monooxygenases. To the best of our knowledge, biphenyl dioxygenase from P. pseudoalcaligenes KF707 is the first prokaryotic enzyme detected that can produce an epoxide derivative on the aromatic ring structure of flavanone.     

Growth Inhibitors of Lettuce Seedlings From Bacillus cereus EJ-121

The ethyl acetate extract of the Bacillus sp. EJ-121 culture broth exhibited growth inhibitory activity on a lettuce (Lactuca sativa L.) seedlings assay. Bacillus sp. EJ-121 was identified as Bacillus cereus by the morphological characteristic and nucleotide sequence of the 16S rDNA. The bioassay-guided fractionation of the ethyl acetate extract led to the isolation of two compounds. Their structures were deduced by spectroscopic methods and determined as sodium vanillate (1) and 2-aminobenzoic acid (2). Both compounds 1 and 2 inhibited more than 90% of root length at 50 ppm (0.26 and 0.36 mM, respectively) while they had a limited effect on shoot growth at the same concentration level. Roots and shoots of lettuce seedlings showed severe deterioration at 100 ppm. In order to study the fundamental structure–activity relationship, several structurally related benzoic acid derivatives were also assayed. The existence of a polar carboxyl moiety seemed to be responsible for the stronger activity.     

The growth and EPA synthesis ofShewanella oneidensis MR-1 and expectation of EPA biosynthetic pathway

Shewanella oneidensis MR-1 has the ability to inhale certain metals and chemical compounds and exhale these materials in an altered state; as a result, this microorganism has been widely applied in bioremediation protocols. However, the relevant characteristics of cell growth and biosynthesis of PuFAs have yet to be thoroughly investigated. Therefore, in this study, we have attempted to characterize the growth and fatty acid profiles ofS. oneidensis MR-1 under a variety of temperature conditions. The fastest growth ofS. oneidensis MR-1 was observed at 30°C, with a specific growth rate and doubling time of 0.6885 h⁻¹ and 1.007 h. The maximum cell mass of this microorganism was elicited at a temperature of 4°C. The eicosapentaenoic acid (EPA) synthesis ofS. oneidensis MR-1 was evaluated under these different culture temperatures.S. oneidensis MR-1 was found not to synthesize EPA at temperatures in excess of 30°C, but was shown to synthesize EPA at temperatures below 30°C. The EPA content was found to increase with decreases in temperature. We then evaluated the EPA biosynthetic pathway, using a phylogenetic tree predicted on 16s rRNA sequences, and the homology of ORFs betweenS. oneidensis MR-1 andShewanella putrefaciens SCRC-2738, which is known to harbor a polyketide synthase (PKS)-like module. The phylogenetic tree revealed that MR-1 was very closely related to bothMoritella sp., which is known to synthesize DHA via a PKS-like pathway, andS. putrefaciens, which has been reported to synthesize EPA via an identical pathway. The homology between the PKS-like module ofS. putrefaciens SCRC-2738 and the entire genome ofS. oneidensis MR-1 was also analyzed, in order to mine the genes associated with the PKS-like pathway inS. oneidensis MR-1. A putative PKS-like module for EPA biosynthesis was verified by this analysis, and was also corroborated by the experimental finding thatS. oneidensis MR-1 was able to synthesize EPA without the expression of dihomo-γ-linoleic acid (DGLA) and arachidonic acid (AA) formed during EPA synthesis via the FAS pathway.     

Life Cycle Assessment of a Personal Computer and its Effective Recycling Rate (7 pp)

Background, Aims and Scope Telecommunication and information technology, dramatically emerged during the last decade, has generated environmental problems by accelerating mass production, mass consumption, and mass disposal of personal computers (PCs) in Korea. In addition, it has led the Korean new economy. The Korean government has encouraged researchers and industry to study the environmental impact, adequate disposal treatment, and the reasonable recycling rate of an end-of-life personal computer. The main purpose of this research is to investigate the life cycle environmental impact of PCs and to determine the desirable or feasible recycle rate of an end-of-life PC. An LCA on a PC was performed based on different recycling scenario. Target audiences are new product developers, designers, product recovery managers and environmental policy makers who are interested in the environmental impact of PCs and recycling of end-of-life products. Methods A target product is a Pentium IV personal computer made in Korea in 2001, excluding the monitor and peripheral equipment. The procedure of the LCA followed the ISO14040 series. System boundary includes the entire life cycle of the product, including pre-manufacturing (the electrical parts and components manufacturing), manufacturing, transportation, use, and disposal. The LCI and impact assessment database for a PC was constructed using SIMAPRO version 4.0 software and LCI information was compiled by site-specific data and the Korean national database. The LCA was performed on different recycling scenarios: one being that of the current recycling rate of 46%, and the other being the ideal condition of a 100% recycling rate. Results and Discussion Abiotic depletion, global warming, ecotoxicity, human toxicity, acidification, ozone layer depletion, photo-oxidant formation, and eutrophication are adopted as the impact categories. The pre-manufacturing stage was a significant stage for all of the environmental parameters, besides human toxicity potential. PC manufacturing consists of rather simple processes such as assembly and packaging. For improving the environmental performance of PCs, environmental management approaches of design for the environment and green procurement are recommended. The use stage had a significant potential due to the electricity consumption produced by burning fossil fuel. The disposal stage's contribution to environmental impact was largest in human toxicity, and second largest in ozone layer depletion potential. The PC recycling was shown to inhibit all environmental impacts with the exception of the ozone depletion and ecotoxicity potential. The increase of light oil, nitric acid, sulfuric acid, and deoxidating agent consumption during the recycling process contributes to the environmental impact of ozone and ecotoxicity parameters. Current recovery and recycling technologies should be taken into account for enhancing the benefits of recycling. Anyway, the effectiveness of recycling was highlighted by this study. PC recycling reduces the total environmental impact of the product. The PC recycling is recommended to be raised up to at least 63% in order to reduce the environmental burdens of a PC in other life cycle stages. Conclusion and Recommendation This study implies that design for the environment (DfE) in the product design stage and green procurement are recommended for improving the entire environmental performance of electronic equipment such as PCs. The recycling of waste PCs clearly reduces the environmental burden. There are, however, trade-offs among environmental parameters according to the PC recycling rate. Current recycling methods are not effective in reducing ozone depletion and ecotoxicity environmental impact. The product recovery is another key for efficient recycling. Efficient reverse logistics to collect and transport end-of-life PCs should be taken into account to enhance recycling effects. There were several electrical parts not included in this assessment, due to the unavailability of adequate data. Further studies with more detail and reliable inventories for electrical parts and sub-components are recommended. Furthermore, costs of recycling should also be treated in further research.     

Proteomic Analysis of Primary Cultured Rat Cortical Neurons in Chemical Ischemia

To elucidate the molecular events involved in early ischemic neuronal death, we performed two-dimensional proteome profiling of primary cultures of rat cortical neurons following chemical ischemia induced by the administration of sodium azide under glucose-free conditions. Using a lactic dehydrogenase assay and Western blot analysis of dephosporylation of the voltage-gated potassium channel Kv2.1, we determined duration of chemical ischemia of 2 h to be the relevant time-point for early ischemic neuronal death. Sixty-one proteins were differentially expressed, and 26 different proteins were identified by MALDI-TOF with Mascot database searching. The proteome data indicated that chemical ischemia altered the expression of 20 proteins that are involved in stress response/chaperone, brain development, cytoskeletal/structural proteins, metabolic enzymes, and calcium ion homeostasis. Western blotting and immunocytochemical studies of the 6-most functionally significant proteins showed that, in the ischemia-treated group, the expression of glucose-related protein 78, heat shock protein 90 alpha, and α-enolase was significantly increased, while the expression of inositol triphosphate receptor 1 and ATP synthase beta subunit was decreased. In addition, the expression of dihydropyrimidinase-like 3 showed a truncated pattern in the ischemia group. The changes in the expression of these proteins might be significant indicators of early ischemic neuronal death.     

Structural Basis for dsRNA Recognition,Filament Formation,and Antiviral Signal Activation by MDA5

1. Download : Download high-res image (321KB)
2. Download : Download full-size image

Highlights? MDA5 forms an open, C-shaped ring around the viral dsRNA stem ? The CTD of MDA5 has a different orientation and flexibility compared to RIG-I ? MDA5 forms filaments by stacking monomers head-to-tail with a 70° turn per monomer ? The 2CARD domain assembles into oligomers that activate interferon signaling via MAVS     

The Role of Oxidative Stress in Nervous System Aging

While oxidative stress is implicated in aging, the impact of oxidative stress on aging in the peripheral nervous system is not well understood. To determine a potential mechanism for age-related deficits in the peripheral nervous system, we examined both functional and morphological changes and utilized microarray technology to compare normal aging in wild-type mice to effects in copper/zinc superoxide dismutase-deficient (Sod1^−/−) mice, a mouse model of increased oxidative stress. Sod1^−/− mice exhibit a peripheral neuropathy phenotype with normal sensory nerve function and deficits in motor nerve function. Our data indicate that a decrease in the synthesis of cholesterol, which is vital to myelin formation, correlates with the structural deficits in axons, myelin, and the cell body of motor neurons in the Sod1^+/+ mice at 30 months and the Sod1^−/− mice at 20 months compared with mice at 2 months. Collectively, we have demonstrated that the functional and morphological changes within the peripheral nervous system in our model of increased oxidative stress are manifested earlier and resemble the deficits observed during normal aging.